Brand new and sealed , comes with 30 days warranty
Aspire X30 Rover user guide
The kit is extremely easy to operate. All you ever need to do is fill with e liquid, recharge the built-in battery, and change the coil when needed.
Filling with e liquid - Simply unscrew the top of the tank and squeeze in your e liquid before replacing the top. Depending on the e liquid you use there is plenty of space to drip, pour or squeeze drops of the e liquid into the tank. The first time When you first use your tank or change the coil wait five minutes after filling to allow the e liquid to absorb fully into the coil (called ‘priming the coil’) to prevent damage and unpleasant ‘dry hits’.
Turning on and off - Press the fire button five times in a row within two seconds at the start and end of your vaping session to turn the device on and off.
Adjusting the power - With the NX30 you can adjust the power output. This affects the amount of heat generated by the coil. This in turn will have an effect on the amount of vapour produced and its temperature, the flavour delivered and the ‘throat hit’ that you experience. You can also adjust the power to take shorter or longer inhales but still create the same amount of vapour. The recommended range when used with the supplied Nautilus X tank and 1.8 Ω resistance coil is between 12 and 16 watts. You will get the best lifespan from your 1.8 Ω coils at 12 – 16 watts. Any higher and the coil will burn out faster. Any lower and the coil will not fire as easily with less effective vapour production. We generally recommend to start low and gradually increase until you are satisfied. All coils have the recommended wattage rating etched on the side so you can’t go wrong. Simply use the + and – buttons to adjust the power output to your preferred level, displayed in watts (W) on the screen.
How to vape - Just place the mouthpiece between your lips and slowly draw in breath (for up to 10 seconds) whilst pressing the fire button.
Charging - A battery indicator on the side of the display screen indicates how much battery power remains so that you know when to recharge. There is a micro USB port on the side of the NX30. Connect this to a USB port or mains adaptor using the cable provided to charge.
Changing the coil - When you start to see a reduction in vapour it is time to change the coil. Remove the tank from the NX30 when empty, unscrew the top and then the coil screws directly into the base of the tank. Just remove the existing coil and replace it with a new one. When you refill with e liquid remember to ‘prime the coil’ again (waiting five minutes before first use)
Aspire X30 Rover contents
NX30 box mod e cigarette
Nautilus X tank
Nautilus X 1.8 Ω resistance coil (pre-installed)
USB charging cable
Replacement pyrex glass tube